Setting display and keyboard layout Instruction manual GLM-I
96 38.019.129.001 en
8
The needles may lie very close to each other on the scale or may even overlap. In these
cases the following order applies for displaying
:
– Average value of preset package number (in the front)
– Average value of packages checked (behind it)
– current package weight (in the very back)
If no needle has been activated, there is no analog display.
Mode level: 2
Activate needle of analog display
<Processing> / <Weight class &statistics> / <Statistics display> / <Analog display>
Touch the required needle until the setting "With" on the softkey is highlighted.
If the needle <Mean value n pckg.> is activated, press <Mean value ... pckg.>. To de-
termine average value enter number of packages between 2 and 99
.
To Next Page
Loading...
