Instruction manual GLM-I Codes and scanning rules
38.019.129.001 en 235
19
Partition: Determines at which position the company prefix and item refer-
ence are separated
. Both fields together may have maximum
44 bits. In SGTIN-96, you can set how the fields are separated.
Company prefix: Manufacturer number
Item reference: Article number
Serial number: Serial number, consecutive number of a product
Code content of an EPC-96 code structure rule
When entering content for the different code contents in an EPC-96 code, you can enter
binary, hexadecimal, decimal or other selected contents. The possible code contents can
be found in the following table:
General code content Comments Input format
"Code substring1" to "Code sub-
string7"
Enter length as number of bits Hex format
"Bin constant" Entering binary constants Binary
"HEX constant" Entering hexadecimal con-
stants
Hex format
"Numerator" Specification of number of dig-
its in bits (1-96)
"Total 1 num." to "Total 3 num."
"Gen. No. 1" to "Gen. No. 20" Specification of number of dig-
its in bits (1-96)
"Lot No."
"Batch number" Specification of number of dig-
its in bits (1-96)
"PLU No."
"Alpha PLU no." Specification of number of dig-
its in bits (1-96)
Hex format
"Customer No.:" Specification of number of dig-
its in bits (1-96)
"Alpha customer no." Specification of number of dig-
its in bits (1-96)
Hex format
"Pcs" Specification of number of dig-
its in bits (1-96)
"Device number"
"Text field 1" to "Text field 20" Specification of number of dig-
its in bits (1-96)
Hex format
"Simple text 1" to "Simple text 10"
To Next Page
Loading...
