To Next Page

To Previous Page

Instruction manual GLM-I Weight classes and statistics

38.019.129.001 en 315

Table field "Automat stops after .."

The automatic machine stops automatically at a number of packages with the incorrect

weight. Enter the respective number of packages for each weight class

. If the number of

packages is changed, you only have to reenter the value in one weight class. The values

in other weight classes are updated automatically. If the predefined number of packages is

exceeded, the dispense stops and issues a message. If "0" is preset for a weight class, no

checks are carried out.

Table field "Totalization"

This is where you can activate or deactivate totaling in the total memory for each weight

class.

Table field "Article parameters"

In this field and the next, you can enter weight-class-specific PLU parameters. Independ-

ent of the setting for the PLU, the data entered here are used for PLUs in the respective

weight class.

– "Price", see page 151

– "Codestruct. No. 1", see page 214

– "Code substring1", see page 227

– "Date text field 3", "Date text field 2", "Date text field 1", see page 181

– "Text field 1", "Text field 2", "Text field 3", see page 176

– "Shelf-life 1:", "Shelf-life 2:", see page 189

Table field "Additional article parameters"

– "Print date 1", "Print date 2", "Print date 3", see page 187

– "Device No.", see page 278

– "Operator number", see page 279

– "Lot number", see page 280

Table field "Interface"

This is where you set whether the data should be sent to a list printer or to the EDP at the

same time as a weight check is taking place.

"List printout": Send data to a list printer.

"Send PSV_DATA": Send data to EDP system.

You can print the editor data for checking purposes or to archive them on empty labels,

ticket rolls or lists, see page 83.

Bizerba GLM-I User Manual

Questions and Answers: