Bizerba GLM-I - Page 61

Instruction manual GLM-I Labeling systems
38.019.129.001 en 59
6
Labeler with safety catch, stop bolt or magnet lock.
Illustration 27: Safety catch or stop bolt
Lift safety catch
1
and pivot the labeling
system to the left.
or
Press stop bolt
2
, pull the labeling sys-
tem and pivot it to the left.
or
With rotary arm labeler, loosen labeling
system from magnet holder and pivot it
to the left.
Open printhead
Illustration 28: Pivot lever
Platen printer: Turn pivot lever
3
in the
direction of the arrow.
or
EcoMotion Printer: Turn pivot lever
3
in opposite direction of arrows.
EcoMotion Printer: Open pressure rollers in front of the take-up arbor.
Illustration 29: EcoMotion Printer
Pull out pivot lever and turn it counter-
clockwise.
The pressure rollers are lifted by the
stripping roller
.
Remove backing paper from printer.