Bizerba GLM-I - Page 64

Labeling systems Instruction manual GLM-I
62 38.019.129.001 en
6
Closing printhead
Illustration 38: Pivot lever
Platen printer: Turn pivot lever
12
at
printer down and close printhead
.
or
EcoMotion Printer: Turn pivot lever
12
at printer up and close printhead.
Apply fixation ring
Illustration 39: Insertion diagram
Place the fixation ring
9
of guide roller
10
on the backing paper to guide the
backing paper laterally
.
Press <FEED> several times to dis-
pense blank labels
.
Monitor unwinding, guidance and wind-
ing of label tape
.
Swing the labeling system back until the
catch engages.
Close side door of labeling system.