Display and operating unit Instruction manual GLM-I
80 38.019.129.001 en
7
Editing text or numeric value
The format is provided for input of numbers
. If the numeric value contains a comma or a
unit, comma and unit remain unchanged during input. You do not need to enter comma
and unit.
A respective input keyboard appears on the screen for entering text and number into the
tables.
Touch table field to enter value.
Record text or numeric value with keyboard.
Press <OK>.
or
Press <Enter>.
Editing value from list
To edit the table value a list occurs with the possible settings.
Touch the table value to be edited to open the selection list.
Mark the selected value in the selection list with the cursor keys, by entering the first
letter or by touching it.
Press <OK>.
or
Press <Enter>.
or
Press <Select>. The key <Select> is available if the key block was extended before
calling up table with
<Two lines>, see page 66.
Changing setting of switchable attribute
The setting of a switchable table attribute is indicated through a control field with or without
tick:
If the functions are activated, the respective control field indi-
cates a tick.
If the function is not activated, the respective control field is
empty.
Mark value in table with cursor.
Touch value until required setting is achieved.
or
Press <+/-> until the required setting is achieved.
To Next Page
Loading...
Need help?
General
