Maxim Integrated MAX32665 - Table 21-10: USBHS in Endpoint Interrupt Enable Register; Table 21-9: USBHS out Endpoint Interrupt Flags Register

MAX32665-MAX32668 User Guide
Maxim Integrated Page 412 of 457
Table 21-9: USBHS OUT Endpoint Interrupt Flags Register
USBHS OUT Endpoint Interrupt Flags
USBHS_INTROUTFL
[0x0004]
Bits
Name
Access
Reset
Description
16:12
-
ROC
0
Reserved for Future Use
Do not modify this field.
11
ep11_out
ROC
0
OUT EP11 Interrupt Status Flag
0: OUT Endpoint 11 interrupt not active.
1: OUT Endpoint 1 1interrupt active.
10
ep10_out
ROC
0
OUT EP10 Interrupt Status Flag
0: OUT Endpoint 10 interrupt not active.
1: OUT Endpoint 10 interrupt active.
9
ep9_out
ROC
0
OUT EP9 Interrupt Status Flag
0: OUT Endpoint 9 interrupt not active.
1: OUT Endpoint 9 interrupt active.
8
ep8_out
ROC
0
OUT EP8 Interrupt Status Flag
0: OUT Endpoint 8 interrupt not active.
1: OUT Endpoint 8 interrupt active.
7
ep7_out
ROC
0
OUT EP7 Interrupt Status Flag
0: OUT Endpoint 7 interrupt not active.
1: OUT Endpoint 7 interrupt active.
6
ep6_out
ROC
0
OUT EP6 Interrupt Status Flag
0: OUT Endpoint 6 interrupt not active.
1: OUT Endpoint 6 interrupt active.
5
ep5_out
ROC
0
OUT EP5 Interrupt Status Flag
0: OUT Endpoint 5 interrupt not active.
1: OUT Endpoint 5 interrupt active.
4
ep4_out
ROC
0
OUT EP4 Interrupt Status Flag
0: OUT Endpoint 4 interrupt not active.
1: OUT Endpoint 4 interrupt active.
3
ep3_out
ROC
0
OUT EP3 Interrupt Status Flag
0: OUT Endpoint 3 interrupt not active.
1: OUT Endpoint 3 interrupt active.
2
ep2_out
ROC
0
OUT EP2 Interrupt Status Flag
0: OUT Endpoint 2 interrupt not active.
1: OUT Endpoint 2 interrupt active.
1
ep1_out
ROC
0
OUT EP1 Interrupt Status Flag
0: OUT Endpoint 1 interrupt not active.
1: Interrupt occurred.
0
-
ROC
0
Reserved for Future Use
Do not modify this field.
Table 21-10: USBHS IN Endpoint Interrupt Enable Register
USBHS IN Endpoint Interrupt Enable
USBHS_INTRINEN
[0x0006]
Bits
Name
Access
Reset
Description
16:12
-
R/W
0
Reserved for Future Use
Do not modify this field.
11
ep11_in
R/W
0
IN EP11 Interrupt Enable
Set to 1 to enable the interrupt for IN Endpoint 11.
0: Interrupt disabled.
1: Interrupt enabled.