Cisco ONS 15454 DWDM - B.3.3 AIC-I Card Specifications

B-9
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
December 2006
Appendix B Hardware Specifications
B.3.3 AIC-I Card Specifications
– Normal operation: –40.5 to –56.7 V (in –48 VDC systems)
– Undervoltage: Major alarm
– Overvoltage: Major alarm
• Environmental
– Operating temperature: –40 to +149 degrees Fahrenheit (–40 to +65 degrees Celsius)
– Operating humidity: 5 to 95 percent, noncondensing
– Power consumption: 26.00 W, 0.54 A at –48 V, 88.8 BTU/hr
• Dimensions
– Height: 12.650 in. (321.3 mm)
– Width: 0.716 in. (18.2 mm)
– Depth: 9.000 in. (228.6 mm)
– Depth with backplane connector: 9.250 in. (235 mm)
– Weight not including clam shell: 1.5 lb (0.7 kg)
B.3.3 AIC-I Card Specifications
The AIC-I card has the following specifications:
• Alarm inputs
– Number of inputs: 12 without AEP, 32 with AEP
– Opto-coupler isolated
– Label customer provisionable
– Severity customer provisionable
– Common 32 V output for all alarm inputs
– Each input limited to 2 mA
– Termination: Wire-wrap on backplane without AEP, on AEP connectors with AEP
• Alarm outputs
– Number of outputs: 4 (user configurable as inputs) without AEP, 16 with AEP
– Switched by opto MOS (metal oxide semiconductor)
– Triggered by definable alarm condition
– Maximum allowed open circuit voltage: 60 VDC
– Maximum allowed closed circuit current: 100 mA
– Termination: Wire-wrap on backplane without AEP, on AEP connectors with AEP
• Express orderwire/local orderwire (EOW/LOW)
– ITU-T G.711, ITU-T G.712, Telcordia GR-253-CORE
– A-law, mu-law
Note Due to the nature of mixed coding, in a mixed-mode (A-law/mu-law) configuration, the
orderwire is not ITU-T G.712 compliant.