Cisco ONS 15454 DWDM - Figure 8-6 AD-1 C Card Alarm Profile

8-22
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
September 2005
Chapter 8 Manage Alarms
DLP-G123 Apply Alarm Profiles to Ports
Figure 8-6 AD-1C Card Alarm Profile
Go to Step 3 to apply profiles to a port. Go to Step 4 to apply profiles to all ports on a card.
Step 3 To apply profiles on a port basis:
a. In card view, click the port row in the Profile column.
b. Choose the new profile from the drop-down list.
c. Click Apply. Confirm that the profile updated to the port correctly.
Step 4 To apply profiles to all ports on a card:
a. In card view, click the Force all ports to profile drop-down arrow at the bottom of the window.
b. Choose the new profile from the drop-down list.
c. Click Force (still need to “Apply”).
d. Click Apply. Confirm the profile updated to all ports correctly.
In node view, the Port Level Profiles column indicates port-level profiles with a notation such as
“exist (1)”.
Step 5 To reapply a previous alarm profile after you have applied a new one, select the previous profile and
click Apply again.
Step 6 Return to your originating procedure (NTP).