Cisco ONS 15454 DWDM - Figure 1-17 Installing the Fan-Tray Assembly on the ONS 15454 ANSI

1-43
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
August 2005
Chapter 1 Install the Shelf and Common Control Cards
NTP-G8 Install the Fan-Tray Assembly
Figure 1-17 Installing the Fan-Tray Assembly on the ONS 15454 ANSI
Step 3
To verify that the tray has plugged into the assembly, look at the fan tray and listen to determine that the
fans are running.
Step 4 If you want to install an alarm expansion panel on the ONS 15454 ANSI shelf, continue with the
“NTP-G9 Install the Alarm Expansion Panel (ANSI Only)” procedure on page 1-44. Otherwise,
continue with the “NTP-G10 Attach Wires to Alarm, Timing, LAN, and Craft Pin Connections”
procedure on page 1-47.
Stop. You have completed this procedure.
F
A
N
F
A
I
L
C
R
I
T
M
A
J
M
I
N
38532
Fan tray
assembly
LCD