Cisco ONS 15454 DWDM - D.3.3 ETSI CTC Default Settings; Table D-25 CTC Default Settings (ETSI

D-117
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
August 2005
Appendix D Network Element Defaults
D.3.3 ETSI CTC Default Settings
D.3.3 ETSI CTC Default Settings
Table D-25 lists the CTC-level default settings for the Cisco ONS 15454. Cisco provides the following
user-configurable defaults for CTC.
• Create circuits with the Route Automatically check box selected by default.
• Create TL1-like circuits (instructs the node to create only cross-connects, allowing the resulting
circuits to be in an upgradable state).
• Choose a default network map (which country).
GMT+12:45 Chatham Island
GMT+13:00 Nuku'alofa - Tonga
GMT+13:00 Rawaki, Phoenix Islands
GMT+14:00 Line Islands, Kiritimati - Kiribati
Table D-24 Time Zones (ANSI and ETSI ) (continued)
Time Zone (GMT +/- Hours) Location(s)
Table D-25 CTC Default Settings (ETSI)
Default Name Default Value Default Domain
CTC.circuits.AutoRoute TRUE TRUE, FALSE
CTC.circuits.CreateLikeTL1 FALSE TRUE, FALSE
CTC.network.Map United States -none-, Germany, Japan, Netherlands, South Korea, United Kingdom,
United States