Cisco ONS 15454 DWDM - Replace Backplane Screws with Standoffs

1-45
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
August 2005
Chapter 1 Install the Shelf and Common Control Cards
NTP-G9 Install the Alarm Expansion Panel (ANSI Only)
Figure 1-18 Replace Backplane Screws with Standoffs
Step 2
Attach the remaining two standoffs on either side of the backplane (Figure 1-19).
Step 3 Position the AEP board over the standoffs.
78402
Longer
Shorter