EasyManua.ls Logo

Cisco ONS 15454 DWDM - Linear Configurations

Cisco ONS 15454 DWDM
1218 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18-5
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
August 2005
Chapter 18 Network Reference
18.2.5 Linear Configurations
Figure 18-4 Meshed Ring
18.2.5 Linear Configurations
Linear configurations are characterized by the use of two terminal nodes (west and east). The terminal
nodes can be equipped with a 32MUX-O card and a 32DMX-O card, or a 32WSS card with a 32DMX
or 32DMX-O card. OADM or line amplifier nodes can be installed between the two terminal nodes. Only
unprotected traffic can be provisioned in a linear configuration. Figure 18-5 shows five ONS 15454
nodes in a linear configuration with an amplified and a passive OADM node.
Figure 18-5 Linear Configuration with an OADM Node
Figure 18-6 shows five ONS 15454 nodes in a linear configuration without an OADM node.
See the “17.1.2 Terminal Node” section on page 17-3 for more information.
Anti-ASE
Amplified OADM
Passive OADM
Line amplifier
90997
Amplified OADM Passive OADM
Amplified OADM
OSC
OSC
Passive OADM
Line amplifier
90996
Amplified OADM
West terminal East terminal
OSC
OSC

Table of Contents

Other manuals for Cisco ONS 15454 DWDM

Related product manuals