Cisco ONS 15454 DWDM - DLP- G11 Open the FMEC Cover

1-24
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
August 2005
Chapter 1 Install the Shelf and Common Control Cards
DLP-G11 Open the FMEC Cover
Step 3 Continue with the “NTP-G6 Install the MIC-A/P and MIC-T/C/P FMECs (ETSI Only)” procedure on
page 1-28.
Stop. You have completed this procedure.
DLP-G11 Open the FMEC Cover
Step 1 Unscrew the screws on the FMEC cover (Figure 1-9).
Figure 1-9 Unscrewing the FMEC Cover
Step 2
Use the handles to pull the cover forward.
Step 3 Return to your originating procedure (NTP).
Purpose This task opens the FMEC cover. The FMEC cover must be opened to
install the MIC-A/P and the MIC-C/T/P.
Tools/Equipment Medium slot-head screwdriver
Prerequisite Procedures DLP-G9 Open the Front Cabinet Compartment (Door), page 1-20
Required/As Needed Required
Onsite/Remote Onsite
Security Level None
71086
CISCO ONS 15454
Optical Network System
F
A
N
F
A
IL
C
R
IT
M
A
J
M
IN
Screws