9-18
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
September 2005
Chapter 9 Monitor Performance
DLP-G143 View Band Optical Add/Drop Multiplexer Power Statistics
Step 7 Click Refresh. Optical channel PM statistics for the selected port appear.
Step 8 Return to your originating procedure (NTP).
DLP-G143 View Band Optical Add/Drop Multiplexer Power Statistics
Step 1 In node view, double-click the optical AD-xB-xx.x card where you want to view the optical power
statistics. The card view appears.
Step 2 Click the Performance > Optical Line tabs.
Step 3 In the Port drop-down list, choose an optical line port (Table 9 -3) where you want to view the optical
power statistics.
Table 9-2 Channel OADM Optical Line Ports
Port Name
Port Number
AD-1C-xx.x AD-2C-xx.x AD-4C-xx.x
CHAN RX 1 1 1
CHAN TX 2 2 2
CHAN RX — 3 3
CHAN TX — 4 4
CHAN RX — — 5
CHAN TX — — 6
CHAN RX — — 7
CHAN TX — — 8
Purpose This task enables you to view band OADM minimum, maximum, and
average power statistics on an AD-1B-xx.x or AD-4B-xx.x card.
Tools/Equipment None
Prerequisite Procedures DLP-G46 Log into CTC, page 2-25
Required/As Needed As needed
Onsite/Remote Onsite or remote
Security Level Retrieve or higher
Table 9-3 Band OADM Optical Line Ports
Port Name
Port Number
AD-1B-xx.x AD-4B-xx.x
EXP RX 3 9
EXP TX 4 10
COM RX 5 11
COM TX 6 12
To Next Page
Loading...
