15-26
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
September 2005
Chapter 15 Shelf Hardware Reference
15.7 ONS 15454 ANSI Backplane Covers
Figure 15-24 Laser Warning on the ONS 15454 ETSI Front-Door Label
15.7 ONS 15454 ANSI Backplane Covers
If a backplane does not have an electrical interface assembly (EIA) panel installed, it should have two
sheet metal backplane covers (one on each side of the backplane). See Figure 15-25. Each cover is held
in place with nine 6-32 x 3/8 inch Phillips screws.
78099