10-24
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
September 2005
Chapter 10 Manage the Node
DLP-G164 Delete a Static Route
DLP-G164 Delete a Static Route
Step 1 In node view, click the Provisioning > Network > Static Routing tabs.
Step 2 Click the static route that you want to delete.
Step 3 Click Delete. A confirmation dialog box appears.
Step 4 Click Yes .
Step 5 Return to your originating procedure (NTP).
DLP-G165 Disable OSPF
Step 1 In node view, click the Provisioning > Network > OSPF tabs. The OSPF subtab has several options.
Step 2 In the OSPF on LAN area, uncheck the OSPF active on LAN check box.
Step 3 Click Apply. Confirm that the changes appear.
Step 4 Return to your originating procedure (NTP).
Purpose This task deletes an existing static route on an ONS 15454.
Tools/Equipment None
Prerequisite Procedures DLP-G46 Log into CTC, page 2-25
DLP-G58 Create a Static Route, page 3-18
Required/As Needed As needed
Onsite/Remote Onsite or remote
Security Level Provisioning or higher
Purpose This task disables the OSPF routing protocol process for an ONS 15454
LAN.
Tools/Equipment None
Prerequisite Procedures DLP-G46 Log into CTC, page 2-25
DLP-G59 Set Up or Change Open Shortest Path First Protocol, page 3-19
Required/As Needed As needed
Onsite/Remote Onsite or remote
Security Level Provisioning or higher
To Next Page
Loading...
