10-29
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
September 2005
Chapter 10 Manage the Node
DLP-G172 Manage Domain Icons
Step 1 From the View menu, choose Go to Network View.
Step 2 Right-click the network map and choose Create New Domain from the shortcut menu.
Step 3 When the domain icon appears on the map, click the map name and type the domain name.
Step 4 Press Enter.
Step 5 Return to your originating procedure (NTP).
DLP-G172 Manage Domain Icons
Note All domain changes, such as added or removed nodes, are visible to all users who log into the network.
Step 1 From the View menu, choose Go to Network View.
Step 2 Locate the domain action that you want to perform in Table 10-2 and complete the appropriate steps.
Purpose This task manages CTC network view domain icons.
Tools/Equipment None
Prerequisite Procedures DLP-G46 Log into CTC, page 2-25
DLP-G171 Create Domain Icons, page 10-28
Required/As Needed As needed
Onsite/Remote Onsite or remote
Security Level Provisioning or higher
Table 10-2 Managing Domains
Domain Action Steps
Move a domain Press Ctrl and drag and drop the domain icon to the new location.
Rename a domain Right-click the domain icon and choose Rename Domain from the shortcut
menu. Type the new name in the domain name field.
Add a node to a
domain
Drag and drop the node icon to the domain icon.
Move a node from a
domain to the
network map
Open the domain and right-click a node. Choose Move Node Back to Parent
View.
Open a domain Complete one of the following:
• Double-click the domain icon.
• Right-click the domain and choose Open Domain.
Return to network
view
Right-click the domain view area and choose Go to Parent View from the
shortcut menu.
To Next Page
Loading...
