D-13
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
August 2005
Appendix D      Network Element Defaults
D.2.1 ANSI Card Default Settings
D.2.1.3 MXP_MR_2.5G Card Default Settings
Table D-3 lists the MXP_MR_2.5G card default settings.
MXP-2_5G-10G.pmthresholds.trunk.line.nearend.1day.CV 850400 (B2 
count)
0–849657600
MXP-2_5G-10G.pmthresholds.trunk.line.nearend.1day.ES 864 (seconds) 0–86400
MXP-2_5G-10G.pmthresholds.trunk.line.nearend.1day.FC 40 (count) 0–6912
MXP-2_5G-10G.pmthresholds.trunk.line.nearend.1day.SES 4 (seconds) 0–86400
MXP-2_5G-10G.pmthresholds.trunk.line.nearend.1day.UAS 10 (seconds) 0–86400
MXP-2_5G-10G.pmthresholds.trunk.section.nearend.15min.CV 10000 (B1 
count)
0–7967700
MXP-2_5G-10G.pmthresholds.trunk.section.nearend.15min.ES 500 (seconds) 0–900
MXP-2_5G-10G.pmthresholds.trunk.section.nearend.15min.SEFS 500 (seconds) 0–900
MXP-2_5G-10G.pmthresholds.trunk.section.nearend.15min.SES 500 (seconds) 0–900
MXP-2_5G-10G.pmthresholds.trunk.section.nearend.1day.CV 100000 (B1 
count)
0–764899200
MXP-2_5G-10G.pmthresholds.trunk.section.nearend.1day.ES 5000 (seconds) 0–86400
MXP-2_5G-10G.pmthresholds.trunk.section.nearend.1day.SEFS 5000 (seconds) 0–86400
MXP-2_5G-10G.pmthresholds.trunk.section.nearend.1day.SES 5000 (seconds) 0–86400
Table D-2 MXP_2.5G_10G Card Default Settings (ANSI) (continued)
Default Name Default Value Default Domain
Table D-3 MXP_MR_2.5G Card Default Settings (ANSI)
Default Name Default Value Default Domain
MXP-MR-2_5G.config.client.AlsMode Disabled Disabled, Manual Restart, 
Manual Restart for Test
MXP-MR-2_5G.config.client.AlsRecoveryPulseDuration 4.0 (seconds)
• 2.0, 2.1, 2.2 .. 100.0 when 
AlsMode is Disabled, Auto 
Restart, Manual Restart
• 80.0, 80.1, 80.2 .. 100.0 
when AlsMode is Manual 
Restart for Test
MXP-MR-2_5G.config.client.AlsRecoveryPulseInterval 100 (seconds) 60–300
MXP-MR-2_5G.config.client.ppmPortAssignment UNASSIGNED UNASSIGNED, ONE_GE, 
FC1G ISL, FC2G ISL, 
FICON1G ISL, FICON2G ISL
MXP-MR-2_5G.config.client.ppmSlotAssignment UNASSIGNED UNASSIGNED, PPM (1 Port)
MXP-MR-2_5G.config.fc.distanceExtension.AutoadjustGFPBuffer
Threshold
TRUE TRUE, FALSE
MXP-MR-2_5G.config.fc.distanceExtension.AutoDetect TRUE TRUE, FALSE
MXP-MR-2_5G.config.fc.distanceExtension.Enabled TRUE TRUE, FALSE