16-5
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
April 2006
Chapter 16 Card Reference
16.1.6 Card Compatibility
16.1.6 Card Compatibility
Table 16-2 lists the CTC software compatibility for each DWDM and client card.
TXP_MR_10G
The TXP_MR_10G card has two sets of ports
located on the faceplate.
See the “16.8.1 TXP_MR_10G
Card” section on page 16-82
TXP_MR_10E
The TXP_MR_10E card has two sets of ports
located on the faceplate.
See the “16.8.2 TXP_MR_10E
Card” section on page 16-84
TXP_MR_2.5G
The TXP_MR_2.5G card has two sets of ports
located on the faceplate.
See the “16.8.3 TXP_MR_2.5G
and TXPP_MR_2.5G Cards”
section on page 16-88
TXPP_MR_2.5G
The TXPP_MR_2.5G card has three sets of ports
located on the faceplate.
See the “16.8.3 TXP_MR_2.5G
and TXPP_MR_2.5G Cards”
section on page 16-88
MXP_2.5G_10G
The MXP_2.5G_10G card has 9 sets of ports
located on the faceplate.
See the
“16.8.4 MXP_2.5G_10G Card”
section on page 16-95.
MXP_2.5G_10E
The MXP_2.5G_10E card has 9 sets of ports
located on the faceplate.
See the
“16.8.5 MXP_2.5G_10E Card”
section on page 16-99
MXP_MR_2.5G
The MXP_MR_2.5G card has 9 sets of ports
located on the faceplate.
See the
“16.8.6 MXP_MR_2.5G and
MXPP_MR_2.5G Cards”
section on page 16-106
MXPP_MR_2.5G
The MXPP_MR_2.5G card has ten sets of ports
located on the faceplate.
See the
“16.8.6 MXP_MR_2.5G and
MXPP_MR_2.5G Cards”
section on page 16-106
Table 16-1 DWDM and Client Cards for the ONS 15454 (continued)
Card Port Description For Additional Information
Table 16-2 DWDM and Client Card CTC Software Release Compatibility
Card Type
Compatibility
R4.5 R4.6 R4.7 R5.0 R6.0
Optical Service Channel Cards YesYesYesYesYes
OSCM YesYesYesYesYes
OSC-CSM Yes Yes Yes Yes Yes
Optical Amplifier Cards YesYesYesYesYes
OPT-PRE Yes Yes Yes Yes Yes
OPT-BST Yes Yes Yes Yes Yes
OPT-BST-E Yes Yes Yes Yes Yes
Multiplexer and Demultiplexer Cards YesYesYesYesYes
32MU X- O Yes Yes Yes Yes Yes