10-52
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
September 2005
Chapter 10 Manage the Node
DLP-G193 Delete a User From a Single Node
DLP-G193 Delete a User From a Single Node
Note You cannot delete a user who is currently logged in. To log out a user, you can complete the “DLP-G195
Log Out a User on a Single Node” task on page 10-53, or you can choose the “Logout before delete”
option in the Delete User dialog box.
Note CTC will allow you to delete other Superusers if one Superuser remains. For example, you can delete
the CISCO15 user if you have created another Superuser. Use this option with caution.
Step 1 In node view, click the Provisioning > Security > Users tabs.
Step 2 Choose the user that you want to delete.
Step 3 Click Delete.
Step 4 In the Delete User dialog box, verify that the user name displayed is the one that you want to delete.
Click Logout before delete if the user is currently logged in. (You cannot delete users if they are logged
in.)
Step 5 Click OK.
Step 6 In the User Deletion Results box, click OK.
Step 7 Return to your originating procedure (NTP).
DLP-G194 Delete a User From Multiple Nodes
Note You cannot delete a user who is currently logged in. To log out a user, you can complete the “DLP-G196
Log Out a User on Multiple Nodes” task on page 10-54, or you can choose the “Logout before delete”
option in the Delete User dialog box.
Purpose This task deletes an existing user from a single node.
Tools/Equipment None
Prerequisite Procedures DLP-G46 Log into CTC, page 2-25
Required/As Needed As needed
Onsite/Remote Onsite or remote
Security Level Superuser
Purpose This task deletes an existing user from multiple nodes.
Tools/Equipment None
Prerequisite Procedures DLP-G46 Log into CTC, page 2-25
Required/As Needed As needed
Onsite/Remote Onsite or remote
Security Level Superuser
To Next Page
Loading...
