Cisco ONS 15454 DWDM - Table 5-6 TXP_MR_10 G and TXP_MR_10 E Transponder Card Line Threshold Settings

5-20
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
September 2005
Chapter 5 Provision Transponder and Muxponder Cards
DLP-G219 Change the TXP_MR_10G or TXP_MR_10E Card Line Thresholds for SONET or SDH Payloads
Step 4 Click Apply.
Step 5 Return to your originating procedure (NTP).
SES Severely
errored
seconds
Numeric. Threshold display options include:
• Direction—Near End or Far End
• Interval—15 Min (minutes) or 1 day
• Types—Line or Section (near end only)
Choose an option in each category and click
Refresh.
Numeric. Threshold display options include:
• Direction—Near End or Far End
• Interval—15 Min (minutes) or 1 day
• Types—Multiplex Section or
Regeneration Section (near end only)
Choose an option in each category and click
Refresh.
SEFS (Section only)
Severely
errored
framing
seconds
Numeric. Can be set for Far End for 15-minute
or one-day intervals for Section only. Choose
an interval option and click Refresh.
Numeric. Can be set for Far End for 15-minute
or one-day intervals for Regeneration Section
only. Choose an interval option and click
Refresh.
FC Failure count Numeric. Threshold display options include:
• Direction—Near End or Far End
• Interval—15 Min (minutes) or 1 day
• Types—Line or Section (near end only)
Choose an option in each category and click
Refresh.
Numeric. Threshold display options include:
• Direction—Near End or Far End
• Interval—15 Min (minutes) or 1 day
• Types—Multiplex Section or
Regeneration Section (near end only)
Choose an option in each category and click
Refresh.
UAS Unavailable
seconds
Numeric. Threshold display options include:
• Direction—Near End or Far End
• Interval—15 Min (minutes) or 1 day
• Types—Line or Section (near end only)
Choose an option in each category and click
Refresh.
Numeric. Threshold display options include:
• Direction—Near End or Far End
• Interval—15 Min (minutes) or 1 day
• Types—Multiplex Section or
Regeneration Section (near end only)
Choose an option in each category and click
Refresh.
Table 5-6 TXP_MR_10G and TXP_MR_10E Transponder Card Line Threshold Settings (continued)
Parameter Description Options – ONS 15454 Options – ONS 15454 SDH