8-31
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
September 2005
Chapter 8 Manage Alarms
DLP-G130 Discontinue Alarm Suppression
DLP-G130 Discontinue Alarm Suppression
Caution If multiple CTC sessions are open, discontinuing suppression in one session will discontinue
suppression in all other open sessions.
Step 1 To discontinue alarm suppression for the entire node:
a. In node view, click the Provisioning > Alarm Profiles > Alarm Behavior tab.
b. Uncheck the Suppress Alarms check box.
Suppressed alarms will reappear in the Alarms window. (They might have previously been cleared from
the window using the Synchronize button.) The AS-CMD alarm with the System object will be cleared
in all views.
Step 2 To discontinue alarm suppression for individual cards:
a. In node view, click the Provisioning > Alarm Profiles > Alarm Behavior tabs.
b. Locate the card that is suppressed in the slot list.
c. Uncheck the Suppress Alarms column check box for that slot.
d. Click Apply.
Suppressed alarms will reappear in the Alarms window. (They might have previously been cleared from
the window using the Synchronize button.) The AS-CMD alarm with the slot object (for example,
SLOT-16) will be cleared in all views.
Step 3 To discontinue alarm suppression for ports, click the Provisioning > Alarm Profiles > Alarm Behavior
tabs.
Step 4 Uncheck the Suppress Alarms check box for the port(s) that you no longer want to suppress.
Step 5 Click Apply.
Suppressed alarms will reappear in the Alarms window. (They might have previously been cleared from
the window using the Synchronize button.) The AS-CMD alarm with the port object (for example,
FAC-16-1) will be cleared in all views.
Step 6 Return to your originating procedure (NTP).
Purpose This task discontinues alarm suppression and reenables alarm reporting on
a port, card, or node.
Tools/Equipment None
Prerequisite Procedures DLP-G129 Suppress Alarm Reporting, page 8-29
DLP-G46 Log into CTC, page 2-25
Required/As Needed As needed
Onsite/Remote Onsite or remote
Security Level Provisioning or higher
To Next Page
Loading...
