Cisco ONS 15454 DWDM - Table D-4 MXPP_MR_2.5 G Card Default Settings (ANSI

D-16
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
August 2005
Appendix D Network Element Defaults
D.2.1 ANSI Card Default Settings
D.2.1.4 MXPP_MR_2.5G Card Default Settings
Table D-4 lists the MXPP_MR_2.5G card default settings.
MXP-MR-2_5G.pmthresholds.trunk.line.farend.1day.ES 864 (seconds) 0–86400
MXP-MR-2_5G.pmthresholds.trunk.line.farend.1day.FC 40 (count) 0–6912
MXP-MR-2_5G.pmthresholds.trunk.line.farend.1day.SES 4 (seconds) 0–86400
MXP-MR-2_5G.pmthresholds.trunk.line.farend.1day.UAS 10 (seconds) 0–86400
MXP-MR-2_5G.pmthresholds.trunk.line.nearend.15min.CV 21260 (B2 count) 0–2212200
MXP-MR-2_5G.pmthresholds.trunk.line.nearend.15min.ES 87 (seconds) 0–900
MXP-MR-2_5G.pmthresholds.trunk.line.nearend.15min.FC 10 (count) 0–72
MXP-MR-2_5G.pmthresholds.trunk.line.nearend.15min.SES 1 (seconds) 0–900
MXP-MR-2_5G.pmthresholds.trunk.line.nearend.15min.UAS 3 (seconds) 0–900
MXP-MR-2_5G.pmthresholds.trunk.line.nearend.1day.CV 212600 (B2 count) 0–212371200
MXP-MR-2_5G.pmthresholds.trunk.line.nearend.1day.ES 864 (seconds) 0–86400
MXP-MR-2_5G.pmthresholds.trunk.line.nearend.1day.FC 40 (count) 0–6912
MXP-MR-2_5G.pmthresholds.trunk.line.nearend.1day.SES 4 (seconds) 0–86400
MXP-MR-2_5G.pmthresholds.trunk.line.nearend.1day.UAS 10 (seconds) 0–86400
MXP-MR-2_5G.pmthresholds.trunk.section.nearend.15min.CV 10000 (B1 count) 0–2151900
MXP-MR-2_5G.pmthresholds.trunk.section.nearend.15min.ES 500 (seconds) 0–900
MXP-MR-2_5G.pmthresholds.trunk.section.nearend.15min.SEFS 500 (seconds) 0–900
MXP-MR-2_5G.pmthresholds.trunk.section.nearend.15min.SES 500 (seconds) 0–900
MXP-MR-2_5G.pmthresholds.trunk.section.nearend.1day.CV 100000 (B1 count) 0–206582400
MXP-MR-2_5G.pmthresholds.trunk.section.nearend.1day.ES 5000 (seconds) 0–86400
MXP-MR-2_5G.pmthresholds.trunk.section.nearend.1day.SEFS 5000 (seconds) 0–86400
MXP-MR-2_5G.pmthresholds.trunk.section.nearend.1day.SES 5000 (seconds) 0–86400
Table D-3 MXP_MR_2.5G Card Default Settings (ANSI) (continued)
Default Name Default Value Default Domain
Table D-4 MXPP_MR_2.5G Card Default Settings (ANSI)
Default Name Default Value Default Domain
MXPP-MR-2_5G.config.client.AlsMode Disabled Disabled, Manual Restart,
Manual Restart for Test
MXPP-MR-2_5G.config.client.AlsRecoveryPulseDuration 4.0 (seconds)
• 2.0, 2.1, 2.2 .. 100.0 when
AlsMode is Disabled, Auto
Restart, Manual Restart
• 80.0, 80.1, 80.2 .. 100.0
when AlsMode is Manual
Restart for Test
MXPP-MR-2_5G.config.client.AlsRecoveryPulseInterval 100 (seconds) 60–300