Cisco ONS 15454 DWDM

To Next Page

To Previous Page

5-31

Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0

September 2005

Chapter 5 Provision Transponder and Muxponder Cards

NTP-G97 Modify Line Settings and PM Parameter Thresholds for MXP_2.5G_10G and MXP_2.5G_10E Cards

NTP-G97 Modify Line Settings and PM Parameter Thresholds for

MXP_2.5G_10G and MXP_2.5G_10E Cards

Step 1 Complete the “DLP-G46 Log into CTC” task on page 2-25 at the node where you want to change the

muxponder card settings. If you are already logged in, continue with Step 2.

Step 2 As needed, complete the “NTP-G103 Back Up the Database” procedure on page 13-2 to preserve the

existing transmission settings.

Step 3 Perform any of the following tasks as needed:

• DLP-G222 Change Card Settings for MXP_2.5G_10G and MXP_2.5G_10E Cards, page 5-32

• DLP-G223 Change Line Settings for MXP_2.5G_10G and MXP_2.5G_10E Cards, page 5-34

• DLP-G224 Change Section Trace Settings for MXP_2.5G_10G and MXP_2.5G_10E Cards, page

5-36

• DLP-G225 Change Trunk Settings for MXP_2.5G_10G and MXP_2.5G_10E Cards, page 5-38

• DLP-G226 Change Line Thresholds Settings for MXP_2.5G_10G and MXP_2.5G_10E Cards, page

5-39

• DLP-G303 Provision the MXP_2.5G_10G and MXP_2.5G_10E Trunk Port Alarm and TCA

Thresholds, page 5-41

• DLP-G304 Provision the MXP_2.5G_10G and MXP_2.5G_10E Client Port Alarm and TCA

Thresholds, page 5-43

• DLP-G228 Change Line OTN Settings for MXP_2.5G_10G and MXP_2.5G_10E Cards, page 5-44

Step 4 As needed, complete the “NTP-G103 Back Up the Database” procedure on page 13-2.

Stop. You have completed this procedure.

Purpose This procedure changes the line and threshold settings for

MXP_2.5G_10G and MXP_2.5G_10E muxponder cards.

Tools/Equipment None

Prerequisite Procedures NTP-G32 Install the Transponder and Muxponder Cards, page 3-43.

DLP-G63 Install an SFP or XFP, page 3-45

DLP-G277 Provision a Multirate PPM, page 5-3 (if necessary)

DLP-G278 Provision the Optical Line Rate, page 5-6 (if necessary)

Required/As Needed As needed

Onsite/Remote Onsite or remote

Security Level Provisioning or higher

Cisco ONS 15454 DWDM - Cards