Cisco ONS 15454 DWDM - Table 5-1 PPM Port Types; Mxp_Mr_10 E; Mxp_Mr_10 G; Mxp_Mr_2.5 G

5-7
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
September 2005
Chapter 5 Provision Transponder and Muxponder Cards
DLP-G278 Provision the Optical Line Rate
Note The TXP_MR_10G card is the only TXP or MXP card that does not accept PPMs.
Step 7 Return to your originating procedure (NTP).
Table 5-1 PPM Port Types
Card Port Type
TXP_MR_2.5G and
TXPP_MR_2.5G
• OC-3/STM1—155 Mbps
• OC-12/STM4—622 Mbps
• OC-48/STM16—2.48 Gbps
• ONE_GE—One Gigabit Ethernet 1.125 Gbps
• ESCON—Enterprise System Connection (IBM signal)
• DV6000—Proprietary signal from video vendor
• SDI_D1_VIDEO—Serial Digital Interface and Digital Video
signal type 1
• HDTV—High Definition Television
• PASS-THRU—Not specified
• FC1G—Fibre Channel 1.06 Gbps
• FC2G—Fibre Channel 2.125 Gbps
• FICON1G—Fiber CON 1.06 Gbps (IBM signal)
• FICON2G—Fiber CON 2.125 Gbps (IBM signal)
• ETR_CLO—External Time Reference – Control Link
Oscillator
• ISC compat—InterSystem Coupling Link 1 (ISC1)
• ISC peer—InterSystem Coupling Link 3 (ISC3)
MXP_2.5G_10G and
MXP_2.5G_10E
• OC-48/STM16—2.48 Gbps
TXP_MR_10E
• OC-192/STM-64—10 Gbps
• 10G Ethernet LAN Phy—10 Gbps Ethernet
• 10G Fibre Channel—10 Gbps Fibre Channel
MXP_MR_2.5G and
MXPP_MR_2.5G
• FC1G—Fibre Channel 1.06 Gbps
• FC2G—Fibre Channel 2.125 Gbps
• FICON1G—Fiber CON 1.06 Gbps (IBM signal)
• FICON2G—Fiber CON 2.125 Gbps (IBM signal)
• ONE_GE—One Gigabit Ethernet 1.125 Gbps