Cisco ONS 15454 DWDM - D.2.3 ANSI CTC Default Settings; Table D-12 CTC Default Settings (ANSI

D-56
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
August 2005
Appendix D Network Element Defaults
D.2.3 ANSI CTC Default Settings
D.2.3 ANSI CTC Default Settings
Table D-12 lists the CTC-level default settings for the Cisco ONS 15454. Cisco provides the following
types of user-configurable defaults for CTC.
• Create circuits with the Route Automatically check box selected by default.
• Create TL1-like circuits—Instructs the node to create only cross-connects, allowing the resulting
circuits to be in an upgradable state.
• Choose a default network map (which country).
NODE.timing.bits-2.LBO 0-133 0-133, 134-266, 267-399,
400-533, 534-655
NODE.timing.bits-2.State IS IS, OOS,DSBLD
NODE.timing.bits-2.StateOut IS IS, OOS,DSBLD
NODE.timing.general.Mode External External, Line, Mixed
NODE.timing.general.QualityOfRES RES=DUS
• PRS<RES, STU<RES<PRS,
ST2<RES<STU,
ST3<RES<ST2,
SMC<RES<ST3,
ST4<RES<SMC, RES<ST4,
RES=DUS when
SSMMessageSet is
Generation 1
• PRS<RES, STU<RES<PRS,
ST2<RES<STU,
TNC<RES<ST2,
ST3E<RES<TNC,
ST3<RES<ST3E,
SMC<RES<ST3,
ST4<RES<SMC, RES<ST4,
RES=DUS when
SSMMessageSet is
Generation 2
NODE.timing.general.ReversionTime 5.0 (minutes) 0.5, 1.0, 1.5 .. 12.0
NODE.timing.general.Revertive FALSE TRUE, FALSE
NODE.timing.general.SSMMessageSet Generation 1 Generation 1, Generation 2
Table D-11 Node Default Settings (ANSI) (continued)
Default Name Default Value Default Domain
Table D-12 CTC default settings (ANSI)
Default Name Default Value Default Domain
CTC.circuits.AutoRoute TRUE TRUE, FALSE
CTC.circuits.CreateLikeTL1 FALSE TRUE, FALSE
CTC.network.Map United States -none-, Germany, Japan, Netherlands, South Korea, United Kingdom,
United States