Cisco ONS 15454 DWDM - D.3.1.1 MXP_2.5 G_10 G Card Default Settings

D-58
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
August 2005
Appendix D Network Element Defaults
D.3.1 ETSI Card Default Settings
Note For more information about each individual card setting, see Chapter 11, “Change DWDM Card
Settings.”
Note For more information about the performance monitoring parameters, see the Chapter 9, “Monitor
Performance.”
D.3.1.1 MXP_2.5G_10G Card Default Settings
Table D-13 lists the MXP_2.5G_10G card default settings.
Table D-13 MXP_2.5G_10G Card Default Settings (ETSI)
Default Name Default Value Default Domain
MXP-2_5G-10G.config.client.AINSSoakTime 08:00
(hours:mins)
00:00, 00:15, 00:30 .. 48:00
MXP-2_5G-10G.config.client.AlsMode Disabled Disabled, Auto Restart, Manual
Restart, Manual Restart for Test
MXP-2_5G-10G.config.client.AlsRecoveryPulseDuration 4.0 (seconds)
• 2.0, 2.1, 2.2 .. 100.0 when
AlsMode is Disabled, Auto
Restart, Manual Restart
• 80.0, 80.1, 80.2 .. 100.0
when AlsMode is Manual
Restart for Test
MXP-2_5G-10G.config.client.AlsRecoveryPulseInterval 100 (seconds) 60–300
MXP-2_5G-10G.config.client.ppmPortAssignment STM16_POR
T
UNASSIGNED, STM16_PORT
MXP-2_5G-10G.config.client.ppmSlotAssignment UNASSIGNE
D
UNASSIGNED, PPM (1 Port)
MXP-2_5G-10G.config.client.SDBER 1E-7 1E-5, 1E-6, 1E-7, 1E-8, 1E-9
MXP-2_5G-10G.config.client.SendDoNotUse FALSE TRUE, FALSE
MXP-2_5G-10G.config.client.SFBER 1E-4 1E-3, 1E-4, 1E-5
MXP-2_5G-10G.config.client.SyncMsgIn TRUE FALSE, TRUE
MXP-2_5G-10G.config.client.TerminationMode Transparent Transparent, Multiplex Section
MXP-2_5G-10G.config.trunk.AINSSoakTime 08:00
(hours:mins)
00:00, 00:15, 00:30 .. 48:00
MXP-2_5G-10G.config.trunk.AlsMode Disabled Disabled, Auto Restart, Manual
Restart, Manual Restart for Test
MXP-2_5G-10G.config.trunk.AlsRecoveryPulseDuration 4.0 (seconds)
• 2.0, 2.1, 2.2 .. 100.0 when
AlsMode is Disabled, Auto
Restart, Manual Restart
• 80.0, 80.1, 80.2 .. 100.0
when AlsMode is Manual
Restart for Test