9-14
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
September 2005
Chapter 9 Monitor Performance
DLP-G141 View Optical Power Statistics for 32MUX-O, 32-WSS, 32-DMX-O, and 32DMX Cards
Figure 9-3 Optical Channel Tab in the Multiplexer/Demultiplexer Card View Performance
Window
Step 3
In the Port drop-down list, choose an optical channel to view by selecting the port where you want to
view the optical power statistics.
• 32MUX-O—optical channel receive port (CHAN RX), Ports 01 through 32.
• 32WSS—optical channel receive port (ADD RX) Ports 01 through 32, or a pass-through port (PT),
Ports 33 through 64.
• 32DMX-O and 32DMX—optical channel transmit port (CHAN TX), Ports 01 through 32.
Step 4 Click Refresh. Optical channel power statistics (minimum, maximum, average) for the selected port
appear.
Step 5 Click the Optical Line tab.
Step 6 For a 32WSS card, select the port for which you wish to monitor power statistics (65, 66, 67, 68, or 69).
For a 32DMX or 32DMX-O card, accept the default port (33).
Step 7 Click Refresh. Optical channel power statistics (minimum, maximum, average) for the selected port
appear.
Step 8 Return to your originating procedure (NTP).
96970
Directions
radio buttons
Performance
tab
Optical
Channel tab
Card View
Intervals
radio buttons
Clear
button
Help
button
Baseline
button
Auto-refresh
menu
Refresh
button
Signal-type
port menu
To Next Page
Loading...
