16-79
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
April 2006
Chapter 16 Card Reference
16.7.6 32WSS Card
Figure 16-52 32WSS Block Diagram
Aggregate optical signals that enter the EXP RX and COM RX port are processed in two ways. The
optical processing stages are shown in Figure 16-53, which provides a detailed optical functional
diagram of the 32WSS card.
EXP RX port
(In from other 32WSS
ithin the network element)
EXP TX port
(To the other 32WSS
ithin the network element)
DROP TX port
dropped channels
(To COM RX port
of 32DMX)
COM RX port
(In from preamplifier,
OPT-PRE, or OSC-CSM)
COM TX port
(To OPT-BST or
OSC-CSM)
115293
32 add ports
Add 1 Add 2 Add 32
Optical
splitter
Add channel
or pass-through
Wavelength
selective switch