Cisco ONS 15454 DWDM - Page 1207

D-107
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
August 2005
Appendix D Network Element Defaults
D.3.2 ETSI Node Default Settings
• Use NTP SNTP Server—Enables or disables the use of the specified NTP SNTP server with the
node.
• Linear Multiplex Section Protection (LMSP) settings—Determine whether or not LMSP-protected
circuits have bidirectional switching, are revertive, and what the reversion time is.
• MS-SPRing protection settings—Determine whether multiplex section-shared protection ring
(MS-SPRing) protected circuits are revertive and what the reversion time is at both the ring and span
levels.
• Y Cable Protection settings—Determine whether Y-cable protected circuits have bidirectional
switching, are revertive, and what the reversion time is.
• Security Policy settings—Determine the allowable failed logins before lockout, idle user timeout for
each user level, optional lockout duration or manual unlock enabled, password reuse and change
frequency policies, number of characters difference between the old and new password, password
aging by security level, enforced single concurrent session per user, and disable inactive user after a
set inactivity period.
• BITS Timing settings—Determine the AIS threshold, coding, framing, State, State Out, and LBO
settings for BITS1 and BITS2 timing.
• General Timing settings—Determine the mode (External, Line, or Mixed), quality of RES, revertive,
reversion time, and SSM message set for node timing.
Note For more information about each individual node setting, see Chapter 10, “Manage the Node.”
Table D-23 Node Default Settings (ETSI)
Default Name Default Value Default Domain
NODE.circuits.sncp.HO_SDBER 1E-6 1E-5, 1E-6, 1E-7, 1E-8, 1E-9
NODE.circuits.sncp.HO_SFBER 1E-4 1E-3, 1E-4, 1E-5
NODE.circuits.sncp.LO_SDBER 1E-6 1E-5, 1E-6, 1E-7, 1E-8
NODE.circuits.sncp.LO_SFBER 1E-4 1E-3, 1E-4, 1E-5
NODE.circuits.sncp.ReversionTime 5.0 (minutes) 0.5, 1.0, 1.5 .. 12.0
NODE.circuits.sncp.Revertive FALSE TRUE, FALSE
NODE.circuits.State unlocked,
automaticInSer
vice
unlocked, locked, disabled, locked,
maintenance, unlocked,
automaticInService
NODE.general.DefaultsDescription Factory
Defaults
Free form field
NODE.general.NtpSntpServer 0.0.0.0 IP Address
NODE.general.TimeZone (GMT-08:00)
Pacific Time
(US &
Canada),
Tijuana
(For applicable time zones, see
Table D-24 on page D-114.)
NODE.general.UseDST TRUE TRUE, FALSE
NODE.network.general.AlarmMissingBackplaneLAN FALSE TRUE, FALSE
NODE.network.general.CtcIpDisplaySuppression FALSE TRUE, FALSE