Contents
xxi
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
August 2005
16.8.2.7 FEC and E-FEC Modes 16-87
16.8.2.8 Client-to-Trunk Mapping 16-87
16.8.2.9 Automatic Laser Shutdown 16-87
16.8.2.10 TXP_MR_10E Card-Level Indicators 16-88
16.8.2.11 TXP_MR_10E Port-Level Indicators 16-88
16.8.3 TXP_MR_2.5G and TXPP_MR_2.5G Cards 16-88
16.8.3.1 Faceplate 16-90
16.8.3.2 Block Diagram 16-91
16.8.3.3 Y-Cable Protection 16-92
16.8.3.4 Splitter Protection 16-93
16.8.3.5 Automatic Laser Shutdown 16-93
16.8.3.6 TXP_MR_2.5G and TXPP_MR_2.5G Safety Labels 16-93
16.8.3.7 TXP_MR_2.5G and TXPP_MR_2.5G Card-Level Indicators 16-94
16.8.3.8 TXP_MR_2.5G and TXPP_MR_2.5G Port-Level Indicators 16-95
16.8.4 MXP_2.5G_10G Card 16-95
16.8.4.1 Y-Cable Protection 16-98
16.8.4.2 Automatic Laser Shutdown 16-98
16.8.4.3 Timing Synchronization 16-98
16.8.4.4 MXP_2.5G_10G Card-Level Indicators 16-99
16.8.4.5 MXP_2.5G_10G Port-Level Indicators 16-99
16.8.5 MXP_2.5G_10E Card 16-99
16.8.5.1 Key Features 16-100
16.8.5.2 Faceplate 16-101
16.8.5.3 Client Interfaces 16-102
16.8.5.4 DWDM Interface 16-102
16.8.5.5 Multiplexing Function 16-102
16.8.5.6 Timing Synchronization 16-103
16.8.5.7 Y-Cable Protection 16-103
16.8.5.8 Enhanced FEC (E-FEC) Capability 16-103
16.8.5.9 FEC and E-FEC Modes 16-104
16.8.5.10 SONET/SDH Overhead Byte Processing 16-104
16.8.5.11 Client Interface Monitoring 16-104
16.8.5.12 Wavelength Identification 16-104
16.8.5.13 Automatic Laser Shutdown 16-105
16.8.5.14 Jitter 16-105
16.8.5.15 Lamp Test 16-106
16.8.5.16 Onboard Traffic Generation 16-106
16.8.5.17 MXP_2.5G_10E Card-Level Indicators 16-106
16.8.5.18 MXP_2.5G_10E Port-Level Indicators 16-106
16.8.6 MXP_MR_2.5G and MXPP_MR_2.5G Cards 16-106