5-76
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
September 2005
Chapter 5 Provision Transponder and Muxponder Cards
DLP-G240 Change MXP_MR_2.5G and MXPP_MR_2.5G Card Line Threshold Settings for SONET or SDH Payloads
Step 4 Click Apply.
Step 5 Return to your originating procedure (NTP).
SEFS (Section only)
Severely errored
framing seconds.
Numeric. Threshold display options
include:
• Direction—Near End or Far End
• Interval—15 Min (minutes) or 1 day
• Types—Line or Section (near end
only)
Choose an option in each category and
click Refresh.
Numeric. Threshold display options
include:
• Direction—Near End or Far End
• Interval—15 Min (minutes) or 1 day
• Types—Multiplex Section or
Regeneration Section (near end only)
Choose an option in each category and
click Refresh.
FC (Line only) Failure
count.
Numeric. Threshold display options
include:
• Direction—Near End or Far End
• Interval—15 Min (minutes) or 1 day
• Types—SM (OTUk) or PM (ODUk)
Choose an option in each category and
click Refresh.
Numeric. Threshold display options
include:
• Direction—Near End or Far End
• Interval—15 Min (minutes) or 1 day
• Types—SM (OTUk) or PM (ODUk)
Choose an option in each category and
click Refresh.
UAS (Line only)
Unavailable
seconds.
Numeric. Threshold display options
include:
• Direction—Near End or Far End
• Interval—15 Min (minutes) or 1 day
• Types—Section only
Choose an option in each category and
click Refresh.
Numeric. Threshold display options
include:
• Direction—Near End or Far End
• Interval—15 Min (minutes) or 1 day
• Types—Regeneration Section (only)
Choose an option in each category and
click Refresh.
Table 5-46 MXP_MR_2.5G and MXPP_MR_2.5G Muxponder Card Line Threshold Settings (continued)
Field Description ONS 15454 Options ONS 15454 SDH Options
To Next Page
Loading...
