7-24
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
September 2005
Chapter 7 Create Channels and Circuits
NTP-G62 Create a J0 Section Trace
• Click Default to return to the section trace default settings (Section Trace Mode is set to Off and
the New Transmit and New Expected Strings are null).
Caution Clicking Default will generate alarms if the port on the other end is provisioned with a different string.
The expect and receive strings are updated every few seconds if the Section Trace Mode field is set to
Auto or Manual.
Stop. You have completed this procedure.
To Next Page
Loading...
