8-5
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
September 2005
Chapter 8 Manage Alarms
DLP-G114 Export CTC Data
Spreadsheet and database management programs also allow you to manage the exported data.
Note An exported file cannot be opened in CTC.
The export operation applies to all tabular data except:
• Provisioning > General > General and Power Monitor windows
• Provisioning > Network > General window
• Provisioning > Security > Policy, Access, and Legal Disclaimer windows
• Provisioning > SNMP window
• Provisioning > Timing window
• Provisioning > OSI > Main Setup window
• Provisioning > OSI > TARP > Config window
• Maintenance > Cross-Connect > Cards windows
• Maintenance > Database window
• Maintenance > Diagnostic window
• Maintenance > Protection window
• Maintenance > Timing > Source windows
• Maintenance > DWDM > ROADM Power Monitoring window [ETSI only]
Step 6 Click OK.
Step 7 In the Save dialog box, enter a name in the File name field using one of the following formats:
• filename.html for HTML files
• filename.csv for CSV files
• filename.tsv for TSV files
Step 8 Navigate to a directory where you want to store the file.
Step 9 Click Save.
Step 10 Repeat the task for each window that you want to export.
Step 11 Return to your originating procedure (NTP).
To Next Page
Loading...
