RUGGEDCOM ROX II
CLI User Guide
Chapter 4
Device Management
Enabling/Disabling the NETCONF Summary Log 75
Disable
no admin logging diagnostics snmp-log enabled
3. Type commit and press Enter to save the changes, or type revert and press Enter to abort.
Section4.10.4.3
Enabling/Disabling the NETCONF Summary Log
The NETCONF summary log briefly records NETCONF protocol transactions and, in particular, those which
completed successfully. For example:
.
.
.
<INFO> 5-Apr-2012::04:26:33.877 ruggedcom confd[2098]: netconf id=9450 new ssh session for user "admin"
from 192.168.0.10
<INFO> 5-Apr-2012::04:27:03.574 ruggedcom confd[2098]: netconf id=9450 got rpc:
{urn:ietf:params:xml:ns:netconf:base:1.0}validate attrs: message-id="103"
<INFO> 5-Apr-2012::04:27:04.167 ruggedcom confd[2098]: netconf id=9450 validate source=candidate attrs:
message-id="103"
<INFO> 5-Apr-2012::04:27:06.691 ruggedcom confd[2098]: netconf id=9450 sending rpc-reply, attrs:
message-id="103"
.
.
.
CAUTION!
Configuration hazard – risk of reduced performance. Enabling diagnostic logging will significantly
affect the performance of RUGGEDCOM ROX II. Only enable diagnostic logging when directed by
Siemens.
To enable or disable the NETCONF Summary log, do the following:
1. Make sure the CLI is in Configuration mode.
2. Enable or disable the NETCONF Summary log by typing the following commands:
Enable
admin logging diagnostics netconf-summary-log enabled
Disable
no admin logging diagnostics netconf-summary-log enabled
3. Type commit and press Enter to save the changes, or type revert and press Enter to abort.
Section4.10.4.4
Enabling/Disabling the NETCONF Trace Log
The NETCONF trace log records the text of each NETCONF XML message received by and sent from the device.
Each entry includes the NETCONF session identifier and the full text of the XML message. If the session identifier
is followed by the word read, the XML message was received by the device. The word write indicates the XML
message was sent by the device. For example:
.
To Next Page
Loading...
Need help?
General
