Siemens RUGGEDCOM ROX II User Manual

Chapter 6
Security
RUGGEDCOM ROX II
CLI User Guide
172 Deleting a CA Certificate from the Trusted Certificate Store
Section6.8.3.3
Deleting a CA Certificate from the Trusted Certificate Store
To delete a CA certificate from the Trusted Certificate Store, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the static VLAN by typing:
no admin system-ca-certificates configured-cas certificate
Where certificate is the chosen CA certificate.
3. Type commit and press Enter to save the changes, or type revert and press Enter to abort.
Section6.8.4
Managing CA Certificates and CRLs
This section describes how to view, add and delete Certified Authority (CA) certificates and Certificate Revocation
Lists (CRLs) on the device.
CONTENTS
• Section6.8.4.1, “Viewing a List of CA Certificates and CRLs”
• Section6.8.4.2, “Viewing the Status of a CA Certificate and CRL”
• Section6.8.4.3, “Adding a CA Certificate and CRL”
• Section6.8.4.4, “Deleting a CA Certificate and CRL”
Section6.8.4.1
Viewing a List of CA Certificates and CRLs
To view a list of certificates issued by a Certified Authority (CA) and the Certificate Revocation Lists (CRLs)
associated with them, type:
show running-config security crypto ca
If certificates have been configured, a table or list similar to the following example appears:
ruggedcom# show running-config security crypto ca security crypto ca ca-cert key-cert-sign-certificate
"{--contents--}" ! ! !
If no certificates have been configured, add certificates as needed. For more information, refer to Section6.8.4.3,
“Adding a CA Certificate and CRL”.
Section6.8.4.2
Viewing the Status of a CA Certificate and CRL
To view the status of a CA certificate, type:
show security crypto ca certificate key-cert-sign-certificate-status
Where:

Siemens RUGGEDCOM ROX II Specifications

General

Brand	Siemens
Model	RUGGEDCOM ROX II
Category	Network Hardware
Language	English