Siemens RUGGEDCOM ROX II User Manual

Chapter 13
Unicast and Multicast Routing
RUGGEDCOM ROX II
CLI User Guide
476 Deleting a Key Chain
Parameter Description
start { start } Synopsis:  A string
Sets the time period in which the key on the key chain is considered valid.
expire { expire } Synopsis:  { infinite } or a string
The time at which the key expires.
6. Type commit and press Enter to save the changes, or type revert and press Enter to abort.
Section13.7.9.5
Deleting a Key Chain
To delete a key chain for dynamic RIP routes, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the key chain by typing:
no routing rip key-chain name
Where:
• name is the name of the key chain
3. Type commit and press Enter to save the changes, or type revert and press Enter to abort.
Section13.7.9.6
Deleting a Key
To delete a key from a key chain, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the key by typing:
no routing rip key-chain name key id
Where:
• name is the name of the key chain
• id is the ID of the key
3. Type commit and press Enter to save the changes, or type revert and press Enter to abort.

Siemens RUGGEDCOM ROX II Specifications

General

Brand	Siemens
Model	RUGGEDCOM ROX II
Category	Network Hardware
Language	English