Siemens RUGGEDCOM ROX II User Manual

RUGGEDCOM ROX II
CLI User Guide
Chapter 6
Security
Deleting a CA Certificate and CRL 175
Section6.8.4.4
Deleting a CA Certificate and CRL
To delete a certificate issued by a Certified Authority (CA) and its associated Certificate Revocation List (CRL), do
the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the CA certificate and its associated Certificate Revocation List (CRL) by typing:
no security crypto ca certificate
Where:
• certificate is the name of the certificate
3. Type commit and press Enter to save the changes, or type revert and press Enter to abort.
Section6.8.5
Managing Private Keys
This section describes how to view, add and delete private keys on the device.
NOTE
Private keys are automatically encrypted using an AES-CFB-128 cipher to protect them from being
viewed by unauthorized users.
CONTENTS
• Section6.8.5.1, “Viewing a List of Private Keys”
• Section6.8.5.2, “Adding a Private Key”
• Section6.8.5.3, “Deleting a Private Key”
Section6.8.5.1
Viewing a List of Private Keys
To view a list of unsigned private keys, type:
show running-config security crypto private-key
If private keys have been configured, a table or list similar to the following example appears:
ruggedcom# show running-config security crypto private-key
security
crypto
private-key key
algorithm rsa
contents
"{--contents--}"
!
!
!
If no private keys have been configured, add keys as needed. For more information, refer to Section6.8.5.2,
“Adding a Private Key”.

Siemens RUGGEDCOM ROX II Specifications

General

Brand	Siemens
Model	RUGGEDCOM ROX II
Category	Network Hardware
Language	English