Siemens RUGGEDCOM ROX II User Manual

RUGGEDCOM ROX II
CLI User Guide
Chapter 10
Serial Server
Restarting the Serial Server 329
Section10.1.4
Restarting the Serial Server
To restart the serial server, type:
interfaces serial restart-serserver
Section10.1.5
Resetting a Serial Port
To reset a serial port, type:
interfaces serial port name reset
Where:
• name is the name assigned to the port
Section10.2
Managing Serial Port Protocols
This section describes how to configure and manage serial protocols for serial ports.
CONTENTS
• Section10.2.1, “Serial Port Protocol Concepts”
• Section10.2.2, “Viewing a List of Serial Port Protocols”
• Section10.2.3, “Adding a Serial Port Protocol”
• Section10.2.4, “Configuring the DNP Protocol”
• Section10.2.5, “Configuring the Modbus TCP Protocol”
• Section10.2.6, “Configuring the Raw Socket Protocol”
• Section10.2.7, “Deleting a Serial Port Protocol”
Section10.2.1
Serial Port Protocol Concepts
This section describes some of the concepts important to the implementation of serial port protocols in
RUGGEDCOM ROX II.
CONTENTS
• Section10.2.1.1, “Raw Socket Applications”
• Section10.2.1.2, “Modbus TCP Applications”
• Section10.2.1.3, “DNP Applications”
• Section10.2.1.4, “Incoming/Outgoing Serial Connections”

Siemens RUGGEDCOM ROX II Specifications

General

Brand	Siemens
Model	RUGGEDCOM ROX II
Category	Network Hardware
Language	English