Siemens RUGGEDCOM ROX II User Manual

RUGGEDCOM ROX II
CLI User Guide
Chapter 2
Using RUGGEDCOM ROX II
Interface and Services Commands 39
Section2.5.10.3
Interface and Services Commands
Operational mode provides commands for restarting and displaying information for various interfaces and
services.
Parameter Description
interfaces modem modem [ at |
reset ]
Sends an AT or reset command to the specified modem. Use auto completion to display a list
of available modems.
• at: Sends an AT command to the selected modem. To send multiple AT commands,
separate each command with a : colon.
• reset: Resets the modem.
interfaces serial restart-
serserver
Restarts the serial communication service.
interfaces clearstatistics [
ddsName | t1e1Name | t3e3Name ]
name
Clears statistics for the specified WAN interface. Use tab completion to display a list of
available WAN interfaces.
services dhcpserver show-active-
leases
Displays active DHCP leases.
Section2.5.10.4
Administration Commands
Operational mode provides commands for performing device administration tasks.
Parameter Description
admin acknowledge-all-alarms
Acknowledges all system alarms.
admin clear-all-alarms
Clears all system alarms.
admin delete-all-ssh-known-hosts
Deletes the list of known hosts.
admin delete-ssh-known-hosts
Deletes the host entry from the list of known hosts.
admin restore-factory-defaults
Restores the factory default configuration and settings, but does not erase any files you have
saved on the device.
admin reboot
Reboots the device.
admin restore-factory-defaults
Restores the factory default configuration and settings, but does not erase any files you have
saved on the device.
admin set-system-clock time
YYYY-MM-DD HH:MM:SS
Sets the date and time on the device. To specify just the date, type the date in the format
YYYY-MM-DD. To specify just the time, type the time in the format HH:MM:SS. To specify
both date and time, enclose the string in quotation marks and type the date and time in the
format "YYYY-MM-DD HH:MM:SS".
NOTE
When setting the time, specifying seconds seconds (SS) is optional.

Siemens RUGGEDCOM ROX II Specifications

General

Brand	Siemens
Model	RUGGEDCOM ROX II
Category	Network Hardware
Language	English