Siemens RUGGEDCOM ROX II User Manual

Chapter 7
IP Address Assignment
RUGGEDCOM ROX II
CLI User Guide
264 Managing Static DNS
Section7.4
Managing Static DNS
This section describes how to reserve a static or fixed IP address for the device. While it is more common to obtain
a random address from a dynamic DNS server, obtaining a fixed address from a static DNS server may be required
to connect to Virtual Private Networks (VPNs) or other remote access services that only trust specific IP addresses.
CONTENTS
• Section7.4.1, “Managing Domain Names”
• Section7.4.2, “Managing Domain Name Servers”
Section7.4.1
Managing Domain Names
The DNS service can be configured to use one or more domain names when querying a domain name server. The
list of domain names can include the domain in which the router is a member of, and other domains that may be
used to search for an unqualified host name (i.e. as though it were local).
CONTENTS
• Section7.4.1.1, “Viewing a List of Domain Names”
• Section7.4.1.2, “Adding a Domain Name”
• Section7.4.1.3, “Deleting a Domain Name”
Section7.4.1.1
Viewing a List of Domain Names
To view a list of domain names, type:
show running-config dns search
If domain names have been configured, a table or list similar to the following example appears:
ruggedcom# show running-config admin dns search
admin
dns
search ruggedcom.com
!
!
!
If no domain names have been configured, add names as needed. For more information, refer to Section7.4.1.2,
“Adding a Domain Name”.
Section7.4.1.2
Adding a Domain Name
To add a domain name, do the following:

Siemens RUGGEDCOM ROX II Specifications

General

Brand	Siemens
Model	RUGGEDCOM ROX II
Category	Network Hardware
Language	English