Siemens RUGGEDCOM ROX II User Manual

RUGGEDCOM ROX II
CLI User Guide
Chapter 7
IP Address Assignment
Deleting a Domain Name 265
1. Make sure the CLI is in Configuration mode.
2. Add the domain name by typing:
admin dns search name
Where:
• name is the name of the domain
3. Type commit and press Enter to save the changes, or type revert and press Enter to abort.
Section7.4.1.3
Deleting a Domain Name
To delete a domain name, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the domain name by typing:
no admin dns search name
Where:
• name is the name of the domain
3. Type commit and press Enter to save the changes, or type revert and press Enter to abort.
Section7.4.2
Managing Domain Name Servers
A hierarchical list of domain name servers can be configured for the DNS service. RUGGEDCOM ROX II will contact
each server in the order they are listed when domain names require resolution.
CONTENTS
• Section7.4.2.1, “Viewing a List of Domain Name Servers”
• Section7.4.2.2, “Adding a Domain Name Server”
• Section7.4.2.3, “Deleting a Domain Name Server”
Section7.4.2.1
Viewing a List of Domain Name Servers
To view a list of domain name servers, type:
show running-config dns server
If domain name servers have been configured, a table or list similar to the following example appears:
ruggedcom# show running-config admin dns server
admin
dns
server 10.1.1.1
!

Siemens RUGGEDCOM ROX II Specifications

General

Brand	Siemens
Model	RUGGEDCOM ROX II
Category	Network Hardware
Language	English