Siemens RUGGEDCOM ROX II User Manual

Chapter 1
Introduction
RUGGEDCOM ROX II
CLI User Guide
10 User Permissions
Services Port Number Port Open
Port
Default
Access
Authorized
HTTPS TCP/443 Open (if configured with login) Open Yes
TCP Modbus TCP/502 Open (if configured) Closed No
IPSec IKE UDP/500 Open (if configured) Closed Yes
IPSec NAT-T UDP/4500 Open (if configured) Closed Yes
DNPv3 TCP/20000 Open (if configured) Closed No
RawSocket TCP/configured Open (if configured) Closed No
DHCP Agent UDP/67 Open (if configured) Closed No
DHCP Server UDP/67 listening, 68 responding Open (if configured) Closed No
RADIUS UDP/1812 to send, opens random port
to listen
Open (if configured) Closed Yes
TACACS+ TCP/49 to send, opens random port to
listen
Open (if configured) Closed Yes
L2TP Random Port Open (if configured) Closed Yes
BGP TCP/179 Open (if configured) Closed No
RIP UDP/520 Open (if configured) Closed No
MPLS-Ping UDP/3503 Open (if configured) Closed No
LDP TCP/646 and UDP/646 Open (if configured) Closed No
L2TPv3 UDP/1701 Open (if configured) Closed No
Section1.5
User Permissions
The following table lists the operation, configuration, and action commands permitted to the administrator,
operator, and guest users.
Types of user access:
• Create (C) - can create and remove optional parameters
• Execute (E) - can run an action or command
• No - no access
• Read (R) - read access
• Update (U) - can modify existing parameter
Access
Commands/Paths Permitted
Administrator Operator Guest
Notes
config private | exclusive | no-confirm Allowed Allowed No
/admin/software-upgrade R/U R No
/admin/rox-imaging R/U R No

Siemens RUGGEDCOM ROX II Specifications

General

Brand	Siemens
Model	RUGGEDCOM ROX II
Category	Network Hardware
Language	English