Siemens RUGGEDCOM ROX II User Manual

RUGGEDCOM ROX II
CLI User Guide
Chapter 13
Unicast and Multicast Routing
Adding a VRF Instance and Configuring OSPF 565
If no VRF definitions have been configured, add definitions as needed. For more information, refer to
Section13.11.5.2, “Adding a VRF Definition”.
Section13.11.7.2
Adding a VRF Instance and Configuring OSPF
To add a VRF instance and configure OSPF, do the following:
1. Make sure the CLI is in Configuration mode.
2. Navigate to routing» dynamic» ospf» vrf and configure the following parameter(s) as required:
Parameter Description
{ vrf-name } Synopsis:  A string
The VRF name.
enabled Enables the OSPF dynamic routing protocol.
abr-type { abr-type } Synopsis:  { cisco, ibm, shortcut, standard }
Default:  cisco
The OSPF ABR type.
auto-cost-reference-bandwidth { auto-cost-
reference-bandwidth }
Synopsis:  A 32-bit unsigned integer between 1 and 4294967
Default:  100
Calculates the OSPF interface cost according to bandwidth [1-4294967 Mbps]
compatible-rfc1583 Enables the compatibility with the obsolete RFC1583 OSPF (the current is RFC2178)
default-information-originate Advertises the default route.
default-metric { default-metric } Synopsis:  A 32-bit unsigned integer between 0 and 16777214
The default metric of redistribute routes.
distance { distance } Synopsis:  A 32-bit unsigned integer between 1 and 255
The administrative distance.
opaque-lsa Enables the Opaque-LSA capability (RFC2370).
passive-default Synopsis:  { true, false }
Default:  true
Default passive value for new interface.
refresh-timer { refresh-timer } Synopsis:  A 16-bit unsigned integer between 10 and 1800
Default:  10
The refresh timer.
router-id { router-id } Synopsis:  A string 7 to 15 characters long
The Router ID for OSPF.
always Synopsis:  { true, false }
Default:  false
Always advertise default route even when there is no default route present in routing
table.
metric { metric } Synopsis:  A 32-bit unsigned integer between 0 and 16777214
The metric value for default route.
metric-type { metric-type } Synopsis:  An 8-bit signed integer between 1 and 2
Default:  2

Siemens RUGGEDCOM ROX II Specifications

General

Brand	Siemens
Model	RUGGEDCOM ROX II
Category	Network Hardware
Language	English