Siemens RUGGEDCOM ROX II User Manual

RUGGEDCOM ROX II
CLI User Guide
Chapter 4
Device Management
Managing the Software Configuration 81
no admin logging server address selector name
Where:
• address is the IP address of the remote server
• name is the name of the log selector identifier
3. Type commit and press Enter to save the changes, or type revert and press Enter to abort.
Section4.11
Managing the Software Configuration
Configuration parameters for RUGGEDCOM ROX II can be saved on the device and loaded in the future.
CONTENTS
• Section4.11.1, “Saving the Configuration”
• Section4.11.2, “Loading a Configuration”
Section4.11.1
Saving the Configuration
To save the configuration settings for RUGGEDCOM ROX II as a separate file, type:
admin full-configuration-save format cli file-name filename
Where:
• filename is the name of the configuration file
Alternatively, to include only the default configuration parameter values in the saved configuration file, do the
following:
1. Make sure the CLI is in Configuration mode.
2. Save the default values by typing:
save filename | details
Where:
• filename is the name of the configuration file
If required, once the configuration file has been saved, back it up to a USB mass storage drive. For more
information, refer to Section4.9.2, “Backing Up Files”.
Section4.11.2
Loading a Configuration
To load a configuration file for RUGGEDCOM ROX II, do the following:

Siemens RUGGEDCOM ROX II Specifications

General

Brand	Siemens
Model	RUGGEDCOM ROX II
Category	Network Hardware
Language	English