Siemens RUGGEDCOM ROX II User Manual

Chapter 10
Serial Server
RUGGEDCOM ROX II
CLI User Guide
328 Viewing DNP Device Table Statistics
Parameter Description
This parameter is mandatory.
transport Synopsis:  A string 1 to 8 characters long
The transport protocol (UDP or TCP) for this serial port.
This parameter is mandatory.
rx-packets Synopsis:  A 32-bit unsigned integer
The number of packets received from TCP/UDP.
This parameter is mandatory.
tx-packets Synopsis:  A 32-bit unsigned integer
The number of packets transmitted to TCP/UDP.
This parameter is mandatory.
target-port Synopsis:  A string 1 to 1024 characters long
The target serial port.
This parameter is mandatory.
status Synopsis:  A string 1 to 31 characters long
The connection status of the serial port.
This parameter is mandatory.
Section10.1.3
Viewing DNP Device Table Statistics
To view the statistics collected for DNP device tables, type:
show interfaces serial dnp-device-table
A table or list similar to the following appears:
ruggedcom# show interfaces serial dnp-device-table | tab
DEVICE SERIAL
ADDRESS REMOTE IP PORT
---------------------------------
10 - ser-3-1
20 10.200.22.199 -
This table or list provides the following information:
Parameter Description
device-address Synopsis:  A string 1 to 32 characters long
The DNP device address.
remote-ip Synopsis:  A string 1 to 32 characters long
The IP address of the remote host that provides a connection to the this DNP device address.
This parameter is mandatory.
serial-port Synopsis:  A string 1 to 128 characters long
The target serial port.
This parameter is mandatory.

Siemens RUGGEDCOM ROX II Specifications

General

Brand	Siemens
Model	RUGGEDCOM ROX II
Category	Network Hardware
Language	English