Siemens RUGGEDCOM ROX II User Manual

RUGGEDCOM ROX II
CLI User Guide
Chapter 13
Unicast and Multicast Routing
Viewing the Status of the LDP Neighbor Connection
Information 553
Section13.10.7.4
Viewing the Status of the LDP Neighbor Connection Information
To view the status of the LDP neighbor connection on the device, type:
show mpls ldp status neighbor connection-information
A table similar to the following example appears:
ruggedcom# show mpls ldp status neighbor connection-information
TCP
PEER ID CONNECTION STATE UPTIME
----------------------------------------
2.2.2.2 192.168.10.1 OPER 00:51:51
- 192.168.10.2
6.6.6.6 192.168.20.2 OPER 00:51:53
- 192.168.20.1
Parameter Description
peer-id Synopsis:  A string
The peer ID of the LDP neighbor connection.
tcp-connection Synopsis:  A string
The TCP connection of the LDP neighbor connection.
state Synopsis:  A string
The state of the LDP neighbor connection.
uptime Synopsis:  A string
The up time of the LDP neighbor connection.
This table provides the following information:
Parameter Description
peer-id Synopsis:  A string
The peer ID of the LDP neighbor connection.
tcp-connection Synopsis:  A string
The TCP connection of the LDP neighbor connection.
state Synopsis:  A string
The state of the LDP neighbor connection.
uptime Synopsis:  A string
The up time of the LDP neighbor connection.
Section13.10.7.5
Viewing the Status of the LDP Neighbor Discovery Information
To view the status of the LDP neighbor discovery information on the device, type:
show mpls ldp status neighbor discovery-information
A table or list similar to the following example appears:
ruggedcom# show mpls ldp status neighbor discovery-information
P

Siemens RUGGEDCOM ROX II Specifications

General

Brand	Siemens
Model	RUGGEDCOM ROX II
Category	Network Hardware
Language	English