Siemens RUGGEDCOM ROX II User Manual

RUGGEDCOM ROX II
CLI User Guide
Chapter 13
Unicast and Multicast Routing
Viewing the Memory Statistics 437
Parameter Description
The gateway address.
interface Synopsis:  A string
The interface name.
type Synopsis:  A string
The route type.
weight Synopsis:  A string
The route weight.
metric Synopsis:  A string
The metric value.
If no IPv6 routes have been configured, add routes as needed. For more information, refer to Section13.12.3,
“Adding an IPv6 Static Route”.
Section13.3
Viewing the Memory Statistics
To view statistics related to the Core, RIP, OSPF and BGP daemons, type:
show routing status memory
A list similar to the following example appears:
ruggedcom# show routing status memory
routing status memory
zebra
total 405504
used 359424
free 46080
rip
total 0
used 0
free 0
ospf
total 0
used 0
free 0
bgp
total 0
used 0
free 0
This list provides the following information:
Parameter Description
total Synopsis:  A 32-bit unsigned integer
The total heap allocated (in bytes).
This parameter is mandatory.
used Synopsis:  A 32-bit unsigned integer
The number of used ordinary blocks (in bytes).
This parameter is mandatory.
free Synopsis:  A 32-bit unsigned integer

Siemens RUGGEDCOM ROX II Specifications

General

Brand	Siemens
Model	RUGGEDCOM ROX II
Category	Network Hardware
Language	English