Siemens RUGGEDCOM ROX II User Manual

RUGGEDCOM ROX II
CLI User Guide
Chapter 15
Network Discovery and Management
Viewing Statistics for LLDP Neighbors 667
man address ""
man address if id 0
system caps ""
system caps enabled ""
chassis subtype macAddress
port subtype interfaceName
man address subtype other
man address if subtype unknown
last update 0s
This table or list displays the following information:
Parameter Description
slot Synopsis:  { { --- }{ pm1, pm2, main }{ sm, lm1, lm2, lm3, lm4, lm5, lm6, swport, eth,
serport, celport, wlanport }{ cm, em }{ trnk } }
The slot of the module that contains this port.
port Synopsis:  A 32-bit signed integer between 1 and 16
The port number as seen on the front plate silkscreen of the module.
chassis-id Synopsis:  A string 17 characters long
The Chassis ID information received from a remote Link Layer Discovery Protocol (LLDP)
agent.
port-id Synopsis:  A string 17 characters long
The port ID (MAC) information received from a remote Link Layer Discovery Protocol (LLDP)
agent.
system-name Synopsis:  A string 1 to 255 characters long
The system name information received from a remote Link Layer Discovery Protocol (LLDP)
agent
system-desc Synopsis:  A string 1 to 255 characters long
The system descriptor information received from a remote Link Layer Discovery Protocol
(LLDP) agent.
port-desc Synopsis:  A string 1 to 255 characters long
The port description information received from a remote Link Layer Discovery Protocol
(LLDP) agent.
man-address Synopsis:  A string 31 characters long
The management address received from a remote Link Layer Discovery Protocol (LLDP)
agent.
man-address-if-id Synopsis:  A 32-bit signed integer
The Management Address Interface ID received from a remote Link Layer Discovery Protocol
(LLDP) agent.
system-caps Synopsis:  { other, repeater, bridge, wlanAccessPoint, router, telephone, docsisCableDevice,
stationOnly }
The system capabilities that are advertised for the remote device.
system-caps-enabled Synopsis:  { other, repeater, bridge, wlanAccessPoint, router, telephone, docsisCableDevice,
stationOnly }
Enables/disables the System Capabilities feature.
chassis-subtype Synopsis:  { chassisComponent, interfaceAlias, portComponent, macAddress,
networkAddress, interfaceName, local }
The chassis subtype information received from a remote Link Layer Discovery Protocol (LLDP)
agent.

Siemens RUGGEDCOM ROX II Specifications

General

Brand	Siemens
Model	RUGGEDCOM ROX II
Category	Network Hardware
Language	English